Filling with special salt – AEG 34350 I User Manual

Page 12

Advertising
background image

12

Filling with special salt

Caution! The packaging of dishwasher salt and detergents are often very
similar. The accidental filling of the salt compartment with detergent would
ruin the water softener. Each time you add salt, make sure the carton you
have in your hand really is salt.

To fill:

1. To fill with salt, unscrew the cap of

the salt container.

2. Pour 0,5 l of water inside the

container (this is necessary only
before filling with salt for the
first time).

3. Using the funnel provided, pour in

the salt until the container is full.
Do not worry if water overflows
from the unit when filling with
salt, this is quite normal.

4. Replace the cap making sure that

there is no trace of salt on the
screw thread or on the gasket.

5. Screw on the cap tightly.

When this has been done, all that is required is to periodically top up the
container with salt.

SALE

SAL

T

SALZ

SEL

SR14

Only use salt specifically designed for use in dishwashers.
All other types of salt not specifically designed for use in a
dishwasher, especially table salt, will damage the water softener.
Only fill with salt just before starting one of the complete
washing programmes (not the "Rinse and hold" programme).
This will prevent any grains of salt or salty water, which may
have been spilled, remaining on the bottom of the machine for
any period of time, which may cause corrosion.

152985 45/2 en-es 5-09-2000 8:38 Pagina 12

Advertising