LG LHB977 - Manual (Page 57)

57
Reference
Controlling a TV with the Supplied Universal
Remote Control
You can control the volume, input source, and power state of your TV with
the supplied Universal Remote Control.
You can control your TV using the buttons below.
By pressing You can
TV POWER Turn the TV on or off.
INPUT Switch the TV’s input source between the
TV and other input sources.
PR/CH v v /V V Scan up or down through memorized
channels.
VOL +/– Adjust the volume of the TV.
Note:
Depending on the unit being connected, you may not be able to control
your TV using some of the buttons.
To program the remote to control the TV using the
manufacturer code
If your TV is listed in the table on the next page, set the appropriate
manufacturer code.
1. While holding down TV POWER button, press the number buttons to
select the manufacturer code for your TV (Refer to table on the next
page).
• If more than one code number is listed, try entering them one at a
time until you find the one that works with your TV.
2. Release TV POWER button.
Notes:
•
Depending on your TV, some or all buttons may not function on the TV,
even after entering the correct manufacturer code.
• If you enter a new code number, the code number previously entered
will be erased.
• When you replace the batteries of the remote, the code number you
have set may be reset to the default setting. Set the appropriate code
number again.
POWER
TV Control
Buttons
Number
Buttons
HB954PA-AD.BUSALL_ENG_6605 8/19/09 10:57 AM Page 57