LG 37LY95 - Manual (Page 107)

105
APPENDIX
0 05 5.. V Vo ollu um mee M Mu uttee ((C Co om mm maan nd d 2 2 :: ee))
G To control volume mute on/off.
You can also adjust mute using the MUTE button on
remote control.
Transmission
Data 0 : Volume mute on (Volume off)
1 : Volume mute off (Volume on)
[k][e][ ][Set ID][ ][Data][Cr]
Ack
[e][ ][Set ID][ ][OK][Data][x]
0 03 3.. A Assp peecctt R Raattiio o ((C Co om mm maannd d 2 2 :: cc)) ((M Maaiinn PPiiccttuurree S Siizzee))
G To adjust the screen format. (Main picture format)
You can also adjust the screen format using the ARC
(Aspect Ratio Control) button on remote control or in
the SCREEN menu.
Transmission
Data 1 : Normal screen (4:3)
2 : Wide screen (16:9)
3 : Horizon (Spectacle)
4 : Zoom1
5 : Zoom2
6 : Original
7 : 14:9
8 : Full
9 : 1:1 Pixel
[k][c][ ][Set ID][ ][Data][Cr]
Ack
* Using the PC input, you select either 16:9 or 4:3
screen aspect ratio.
* In HDMI (1080i 50Hz/60Hz, 1080p
24Hz/50Hz/60Hz) mode, 1:1 Pixel is available.
[c][ ][Set ID][ ][OK][Data][x]
0 04 4.. S Sccrreeeen n M Mu uttee ((C Co om mm maan nd d 2 2 :: d d))
G To select screen mute on/off.
Transmission
Data 0 : Screen mute off (Picture on)
1 : Screen mute on (Picture off)
[k][d][ ][Set ID][ ][Data][Cr]
Ack
[d][ ][Set ID][ ][OK][Data][x]
0 06 6.. V Vo ollu um mee C Co on nttrro oll ((C Co om mm maan nd d 2 2 :: ff))
G To adjust volume.
You can also adjust volume with the VOLUME buttons on
remote control.
Transmission
Data Min : 0 ~ Max : 64
* Refer to ‘Real data mapping 1’. See page 107.
[k][f][ ][Set ID][ ][Data][Cr]
Ack
[f][ ][Set ID][ ][OK][Data][x]
0 07 7.. C Co on nttrraasstt ((C Co om mm maan nd d 2 2 :: g g))
G To adjust screen contrast.
You can also adjust contrast in the PICTURE menu.
Transmission
Data Min : 0 ~ Max : 64
* Refer to ‘Real data mapping 1’. See page 107.
[k][g][ ][Set ID][ ][Data][Cr]
Ack
[g][ ][Set ID][ ][OK][Data][x]
0 08 8.. B Brriig gh httn neessss ((C Co om mm maan nd d 2 2 :: h h))
G To adjust screen brightness.
You can also adjust brightness in the PICTURE menu.
Transmission
Data Min : 0 ~ Max : 64
* Refer to ‘Real data mapping 1’. See page 107.
[k][h][ ][Set ID][ ][Data][Cr]
Ack
[h][ ][Set ID][ ][OK][Data][x]
0 02 2.. IIn np pu utt S Seelleecctt ((C Co om mm maan nd d 2 2 :: b b))
G To select input source for the set.
You can also select an input source using the INPUT
button on the set's remote control.
Transmission
Data 0 : DTV
1 : Analogue
2 : AV1
3 : AV2
4 : AV3
5 : Component
6 : RGB-PC
7 : HDMI1
8 : HDMI2
[k][b][ ][Set ID][ ][Data][Cr]
Ack
[b][ ][Set ID][ ][OK][Data][x]
0 01 1.. P Po ow weerr ((C Co om mm maan nd d 2 2 :: aa))
G To control Power On/Off of the set.
Transmission
Data 0 : Power Off 1 : Power On
[k][a][ ][Set ID][ ][Data][Cr]
Ack
[a][ ][Set ID][ ][OK][Data][x]
G To show Power On/Off.
Transmission
[k][a][ ][Set ID][ ][FF][Cr]
Ack
* In like manner, if other functions transmit ‘0xFF’ data
based on this format, Acknowledgement data feed back
presents status about each function.
[a][ ][Set ID][ ][OK][Data][x]