41 stacking kit installation, Key dimensions and specifications – LG DLE2050W User Manual

Page 41

Advertising
background image

41

STACkING kIT INSTALLATION

(cont.)

3

Place the dryer on top of the washer by

fitting the dryer feet into the side brackets as

illustrated. Avoid finger injuries; do not allow

fingers to be pinched between the washer

and dryer. Slowly slide the dryer toward the

back of the washer until the side bracket

stoppers catch the dryer feet.

4

Insert the front rail between the bottom of

the dryer and the top of the washer. Push the

front rail toward the back of the washer until it

comes in contact with the side rail stoppers.
Install the two remaining screws to secure the
front rail to the side rails.

kEY DIMENSIONS AND SPECIFICATIONS

The appearance and specifications listed in this guide may vary due to constant product improvements.

Washer

Dryer

Description

Dryer

Electrical Requirements*

Please refer to the rating label regarding detailed information.

Gas Requirements*

NG: 10–13 in. WC/LP: 10–13 in. WC (Gas Models only)

Dimensions

27"(W) X 30"(D) X 38

11

/

16

"(H), 50 (D with door open)

68.6 cm (W) X 76.1 cm (D) X 98.3 cm (H), 127 cm (D with door open)

Net Weight

Drying Capacity

*Refer to the rating plate on your dryer.

DLE2150W/DLE2150R/DLE2150S/DLE2150L

DLG2151W/DLG2151R/DLG2151S/DLG2151L

126 lb. (57.2 kg)

IEC 7.3 cu. ft. (22.5 lbs./10.2 kg)

IEC 7.1 cu. ft. (22.5 lbs./10.2 kg)

Drying Capacity

DLE2050W/DLE2050R/DLE2050S/DLE2050L

DLG2051W/DLG2051R/DLG2051S/DLG2051L

DLE2020W/DLE2020R/DLE2020S/DLE2020L

DLG2021CW/DLG2021CR/DLG2021CS/

DLG2021CL

Advertising