LG L1942PE-BS - Manual (Page 24)

A23
Installing the Wall mount plate
Wall mount plate (Separate purchase)
This is stand-type or will mount type and is connectable
with Wall mount plate.
Please refer to the installation guide for more details,
which is provided when Wall mount plate is purchased.
Kensington Security Slot
Connected to a locking
cable that can be purchased separately at most
computer stores
This monitor satisfies the specifications of the Wall mount plate or
the interchange device.
1
. Place the monitor with its front facing downward on a soft cloth.
2
. Separate the stand after firstly separating 4 screws by using a driver as figure.
3 . Install the Wall mount plate.
- Be sure to use screws and a wall mount that
meet VESA standards.
- Using screws longer than those
recommended might damage the product.
- Using screws that do not meet VESA
standards might either damage the product or
result in it coming away from the wall.We will
not be held responsible for any damage
resulting from failure to follow these
instructions.
<Please use VESA standard as a recommendation.>
Mounting crew:
Interface pad thickness: 2.6mm
Screw :
4mm x pitch 0.7mm x length 10mm