LG L206WU-PF - Manual (Page 7)

A6
Using the Computer
1.
Make sure to turn off the computer and product.
Connect signal input cable and power cable in order, then tighten the
screw of the signal cable.
1
2.
Press button on the front switch panel to turn the power on.
When monitor power is turned on, the 'Self Image Setting
Function' is executed automatically. (Only Analog Mode)
NOTE
‘ Self Image Setting Function’? This function provides the user with optimal display settings.When the user
connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual
input signals. If you want to adjust the monitor while in use, or wish to manually run this function once again, push the
‘AUTO/SET’ button on the front panel of the monitor. Otherwise, you may execute the ‘ Factory reset’ option on the
OSD adjustment menu. However, be aware that this option initializes all the menu items except ‘Language’.
2
Connecting the Display
A
B
C
Connect DVI Cable
Connect D-sub Cable
Connect USB Cable
A
B
D-SUB DVI-D AC-IN
C
Wall-outlet type
Power Cord Analog signal
D-sub
Digital signal
DVI
DVI-D (This feature is not available in all countries.)
USB
NOTE
This is a simplified representation of the rear view.
This rear view represents a general model; your display may differ from the view as shown.
User must use shielded signal interface cables (D-sub 15 pin cable, DVI cable) with ferrite cores to maintain standard
compliance for the product.