Operating instructions, Remote control, Power – LG LW2414HR User Manual

Page 16: On/off timer fan speed selector, Temperature control, Operation mode selector, Heat

Advertising
background image

The remote control and control panel will look like one of the following pictures.

Operating Instructions

16 Room Air Conditioner

Operating Instructions

Power

Temp

Fan Speed

Timer

Mode

Auto

Swing

REMOTE CONTROLLER

Operation starts when this button is pressed and stops when you

press the button again.

POWER

- when the air conditioner is off, it can be set to automatically turn

Delay OFF

- when the air conditioner is on, it can be set to automatically turn

on from 1 to 24 hours at its previous mode and fan settings.

off from 1 to 24 hours.

Delay ON

ON/OFF TIMER

FAN SPEED SELECTOR

Use to set the fan speed to Low (F1), High (F2).

TEMPERATURE CONTROL

The thermostat monitors room temperature to maintain the desired temperature.

The thermostat can be set between 60 F~86 F (16 C~30 C).

2

3

1

8

5

4

7

6

OPERATION MODE SELECTOR

the desired fan speed.

Cool -

Compressor runs and cools the room.Use the

and FAN buttons to

set the desired temperature and circulation fan speed.

Fan

-

Fan circulates air but compressor does not run. Use the FAN button to set

Heat -

Heater runs and heats the room.

Push the MODE button to rotate between Energy Saver / Cool / Fan / Heat.

Approximately every 3 minutes the fan will turn on and check the room air

Energy Saver -

The fan stops when the compressor stops cooling.

temperature if cooling is needed.

Remote control

Advertising
This manual is related to the following products: