LG LG225 - Manual (Page 66)

62
Settings
]
Preferred: You can set a list of preferred networks
the handset should attempt to register with first,
before attempting to register to any other networks.
This list is created from the handset’s predefined list
of known networks.
GPRS Attach (Menu 9.6.2)
If you select Power On and you are in a network that
supports packet data, the phone registers to the GPRS
network and sending short messages will be done via
GPRS. Also, starting an active packet data connection,
for example, to send and receive e-mail, is quicker. If
you select When Needed, the phone will use a packet
data connection only if you start an application or
action that needs it. The GPRS connection is closed
after it is not used by any application.
n
Note
If there is no GPRS coverage and you have chosen Power
on, the phone will periodically try to establish a packet data
connection.
Network Profiles (Menu 9.6.3)
This feature sets the Profile during the WAP and MMS
connections. The Profile menu under the Access Point
feature will display Add, Delete and Editor options, but
the reason why Activate option is not available is
because there is no way of knowing whether WAP or
MMS will be used to activate the content.
Reset Network profile (Menu 9.6.4)
This allows Profile information to be restored to
original setting. For example, this option will restore
the Profile that has been deleted by the Delete All
selection from the Network Profiles (Menu 4.4)
submenu.
Reset Default Menu 9.7
You can easily reset your phone to its default
configuration. To do so, proceed, as follows.
1. Select the Reset Settings menu option.
2. Enter the 4-digit phone password.
n
Note The password is preset to 0000.