LG G4010 - Manual (Page 27)

51 50
Call Register Call Register
Cost Settings
Call Cost’s Limit
This network service allows you to limit the cost of your calls by
selected charging units. If you select Read, the number of
remaining unit is shown. If you select Change, you can change
your charge limit.
Set Tariff
You can set the currency type and the unit price. Contact your
service providers to obtain charging unit prices. To select the
Currency or 1 Unit in this menu, you need the PIN2 code.
Auto Display
This network service allows you to see automatically the cost of
your last calls. If you select On in Auto Display menu, you can
see the cost of the last call when the call is released.
Note When all units have been used, no calls can be made except
emergency calls. Depending on the SIM card, you need the
PIN2 code to set a call cost limit.
Menu 2.7 GPRS Information
You can check the amount of data transferred over the network
through the GPRS information option. In addition, you can also view
how much time you are online.
WAP Information
You can check the data volume and the duration through WAP.
External Device
You can check the data volume and the duration through GPRS by
using an external device such as a serial port.
Total Data
You can check the total amount of data through WAP and an
external device.
Menu 2.8
(Menu 2.8.1)
(Menu 2.8.2)
(Menu 2.8.3)
(Menu 2.7.1)
(Menu 2.7.2)
(Menu 2.7.3)
Notice GPRS General Packet Radio Service
*
* : Shown only if supported by SIM card