Customizing settings, Menu settings, 14 customizing settings 14 – LG E2351T-BN User Manual
Page 14: Accesses the main menus.(see p.14), See p, English
14
ENG
ENGLISH
CUSTOMIZING SETTINGS
Customizing settings
Menu settings
1
Press any button on the front of the Monitor set to display the
MonItoR setUP OSD menu.
2
Press the
MenU button to display the options in the OSD
menu.
3
Set the options by pressing the ◄ or ► or ▼ buttons.
4
Select
eXIt to leave the OSD menu.
To return to the upper menu or set other menu items, use the
up arrow ( ) button.
Menu
Analog Digital
HDMI
Description
BRIGHtness
o
o
o
Adjusts the brightness of the screen.
oRIGInAL RAtIo
o
o
o
WIDe
Switch to full screen mode according to input image signal.
oRIGInAL
Change the input image signal ratio to original.
* This function works only if input resolution is lower than Monitor
set ratio (16:9).
CoLoR teMP
o
o
o
PReset
Select the screen color.
y
WARM: Set the screen to warm color temperature (more red).
y
MeDIUM: Set the screen to medium color temperature.
y
CooL: Set the screen to cool color temperature (More blue).
UseR
y
ReD: Set your own red color levels.
y
GReen: Set your own green color levels.
y
BLUe: Set your own blue color levels.
ContRAst
o
o
o
Adjusts the contrast of the screen.
BLACK LeVeL
(only supported
in HDMI mode)
X
X
o
You can set the offset level. If you select 'HIGH', the screen will be
bright and if you select ‘LOW’, the screen will be dark.
y
offset: As the criteria for video signal, it is the darkest screen
the monitor can show.
LAnGUAGe
o
o
o
Changes the menu language.
RtC
(only supported in
e2251VQ, e2351VQ
model)
o
o
o
If you set
on, you enable the Response Time Control function and
reduce the afterimage of the screen.
If you set
oFF, you disable the Response Time Control function
and operate at panel response time.
sUPeR eneRGY
sAVInG
o
o
o
Change the SUPER ENERGY SAVING function. (See p.15)
FACtoRY Reset
o
o
o
Returns the monitor to original factory settings except
"LANGUAGE".
y
Analog: D-SUB(Analog signal) input.
y
Digital: DVI-D(Digital signal) input.
y
HDMI: HDMI(Digital signal) input.
MENU
EXIT
BRIGHTNESS
ORIGINAL RATIO
COLOR TEMP
PRESET
RED
GREEN
BLUE
CONTRAST
BLACK LEVEL
LANGUAGE
RTC
SUPER ENEYGY SAVING
FACTORY RESET
WIDE
PRESET
WARM
LOW
ENGLISH
ON
NO
The available MENU settings are described below.
100
50
50
50
70