LG 22EA53T-P - Manual (Page 19)

19
ENG
ENGLISH
CUSTOMIZING SETTINGS
SUPER ENERGY SAVING
1 Press FUNC. button on the bottom of the Monitor set to
display the FUNC. OSD.
2 Select SUPER ENERGY SAVING by pressing the ►
button.
3 Enter to SUPER ENERGY SAVING by pressing the ▼
button.
4 Set the options by pressing the ◄ or ► or ▼buttons.
5 Select EXIT to leave the OSD menu.To return to the
upper menu or set other menu items, use the up arrow
( ) button.
Each option is explained below.
SUPER ENERGY SAVING Description
On Enables Super Energy Saving you can save energy with this energy- efficient function
Off
Reset Disables Super Energy Saving.
Resets the values of total energy consumption reduction and CO2 emission reduction
estimates.
TOTAL POWER REDUCTION: How much power is saved while using the monitor.
TOTAL CO2 REDUCTION: Change the TOTAL POWER REDUCTION to CO2.
SAVING DATA(W/h)
546 mm
(21.5 inch)
SUPER SAVING 5 W/h
584 mm
(23 inch)
6 W/h
Saving Data depends on the Panel. So,those values should be different from each panel and panel
vendor.
LG calculated these values by using “broadcast video signal”
(including broadcast video: IEC 62087)
SUPER SAVING refers to how much power can be saved using the SUPER ENERGY SAVING
function.
NOTE
EXIT
FUNC. > SUPER ENERGY SAVING
On Off
You saved 0.00 trees
Power Reduction:
CO2 Redution:
0W
0g
SUPER ENERGY SAVING
is active
Reset
604 mm
(23.8 inch)
6 W/h