Warning, Water drainage a – LG LP1013WNR User Manual

Page 20

Advertising
background image

C A R E A N D C L E A N I N G

Your air conditioner is designed for year-round

operation with only minimal cleaning and

maintenance.

For maximum efficiency, it is recommended

that you have the cooling coils inspected and

cleaned annually. Your local LG Authorized

Service Center can provide this inspection

and cleaning service for a nominal fee.

WARNING

• Unplug the air conditioner before cleaning or performing any maintenance or servicing.

• Be careful when cleaning coils or removing or reinstalling the filter—the cooling fins are

sharp!

Failure to follow the above precautions could result in electrical shock or personal injury.

WATER DRAINAGE

A

Using the Upper Drain Port (Dry Mode Only)

This product has a self-evaporative system. The condensing water will be recycled to cool the

condenser. This can not only improve cooling efficiency, but also save energy for you.

• This can be used when you need dehumidification in high humidity.
• Under the Cool or Fan mode, there’s no need of using the upper drain port.
• During DRY(dehumidifying) mode, remove the drain plug and the exhaust hose from the back of the unit.

• Install a drain hose (12mm [1/2"] inside diameter) and place the open end of the hose at a suitable drain

location or outdoors.

Unplug the air conditioner, disconnect the exhaust hose from the back, and move the air conditioner to

a suitable drain location or outdoors. You may also place a pan under the drain that will hold up to 2 pints

of water.

When the internal water collection tank is full , the LED display will show FL and the air conditioner

will turn off until the tank is emptied.

Remove the drain cap from the drain outlet.

Once the water collection tank is drained, reinstall the

drain cap, making sure it is on securely.

Place the air conditioner in the desired location,

reconnect the exhaust hose, and plug in the air

conditioner.

20

Using the Bottom Drain Port

NOTES:

When turned on after being unplugged, the air conditioner will automatically reset to

COOL mode, with a temperature setting of 72°F.

FL apperars in the display

The water collection tank is full, drain the tank and restart the air conditioner.

NOTICE

Advertising