LG LP0711WNR - Manual (Page 10)

USING THE CONTROLS
H O W TO U S E
Control panel buttons shown. Operation using the remote control is the same, unless
specifically noted.
1. COOLING MODE
· Press MODE button to choose Cool
mode, the Cool mode indicator will flash.
· Press UP or DOWN button to set room
temperature between .
· Press SPEED button (or High/Low button)
to select high, low fan speed.
2. FAN MODE
· Press MODE button (or Fan button) to
choose Fan mode, the Fan mode indicator
will flash.
Select the fan speed by press FAN button
or press High / Low button directly.
4. TIMER MODE
· When the appliance is switch off, press
Timer button to set timer-on.
· The temperature can not be set.
· Press Up or Down button to adjust time
from 1 hour to 24 hours. The Time
on indicator will flash.
·
Setting sleep mode, the temperature
will rise 1 after 2 hours, and another 2
hours later, rise 1
· Then it will keep steady and low fan blow.
62 F to 86 F
3. DRY MODE
·
When the appliance is running, press
Timer button to set timer-off.
NOTE
Always point the remote at the sensor. The remote may not work if the
sensor is in bright light or if there is not a clear path between the remote
and the sensor.
5. SLEEP MODE
·
Select Dry button for dehumidify Mode.
In Dry mode fan speed is preset. Speed
button is not available. The temperature
can’t be set either.
· Press Swing button to make the louver swing
(use remote control only).
10