LG W2286L-PF - Manual (Page 9)

8
Connecting the Display
A
B
Connect DVI-D(Digital signal) Cable
Connect D-sub(Analog signal) Cable
Connect HDMI Cable
1.
Before setting up the monitor, ensure that the power to the monitor, the computer system, and
other attached devices is turned off.
2.
Connect the signal cable . When attached, tighten the thumbscrews to secure the
connection.
3.
Connect the power cable with the AC-DC adapter (AC-DC power supply) , and then
plug the cable in the outlet.
Connecting with the PC/AV equipment
1
2
Mac adapter : For Apple Macintosh use, a separate plug adapter
is needed to change the 15 pin high density (3 row) D-sub VGA
connector on the supplied cable to a 15 pin 2 row connector.
When using a D-Sub signal input cable connector for Macintosh
NOTE
This is a simplified representation of the rear view.
This rear view represents a general model; your display may differ from the view as shown.
C
3
PC PC
A B C
Wall-outlet type
Varies according to model.
DVI-D (This feature is not
available in all countries.)
Headphones
/ Earphones
HDMI Headphone output
AV equipment (Set-Top Box, DVD,
Video,Video Game Console)
* HDMI is optimized on the AV equipment.
* Not supported PC.