Operation mode selector, On/off timer, Energy saver – LG LT1033HNR User Manual
Page 18: Fan speed selector, Power
REMOTE CONTROLLER
Power
Temp
Fan Speed
Timer
Mode
- when the air conditioner is off, it can be set to automatically turn
OPERATION MODE SELECTOR
the desired fan speed.
Delay OFF
- when the air conditioner is on, it can be set to automatically turn
on from 1 to 24 hours at its previous mode and fan settings.
off from 1 to 24 hours.
Everytime you push this button，it will toggle between Cool, Energy Saver, Fan, and Heat.
Delay ON
ON/OFF TIMER
Cool - Compressor runs and cools the room. Use the
and FAN buttons to
set the desired temperature and circulation fan speed.
Energy Saver
- The fan stops when the compressor stops cooling.
Approximately every 3 minutes the fan will turn on and check the room air
temperature if cooling is needed.
Fan
- Fan circulates air but compressor does not run. Use the FAN button to set
Operation starts when this button is pressed and stops when you
press the button again.
FAN SPEED SELECTOR
Use to set the fan speed to
Low (F1), High (F2).
POWER