Control panel features (continued) – LG LFX31935ST User Manual

Page 28

Advertising
background image

28

HOW TO USE

ENGLISH

Change Filter

Change Filter

When the Change Filter icon turns on, the air
filter needs to be replaced. After replacing the
air filter, press and hold the Fresh Air Filter
button for three seconds to turn the icon light
off. It is recommended to change the air filter
approximately every 6 months.

Control Panel Features (continued)

Ice Plus

Ice Plus

This function increases both ice making and
freezing capabilities.

When you touch the

y

Ice Plus

button, the graphic

will illuminate in the display and will continue
for 24 hours. The function will automatically
shut off after 24 hours.
You can stop this function manually by touching

y

the button one more time.

Energy Saving

Energy Saving

The Energy Saving function disables the mullion
heater located on the refrigerator door in order to
conserve electricity. Press and hold the Energy
Saving button for three seconds to activate or
deactivate this function.

Light

Light

When you press the Light button, the dispenser
light will turn on and the indicator will appear on
the LED display.

Change Water Filter

Change Water Filter

When the water filter indicator turns on, you
have to change the water filter. After changing
the water filter, press and hold the Change Filter
button for three seconds to turn the indicator
light off. You need to change the water filter
approximately every six months.

NOTE

Discontinue using the Energy Saving
function if excessive moisture begins to
collect on the door mullion.

Door Alarm

Door Alarm

When power is connected to the refrigerator,

y

the door alarm is initially set to ON. When you
press the Door Alarm button, the display will
change to OFF and the Door Alarm function will
deactivate.
When either the refrigerator or the freezer

y

door is left open for more than 60 seconds, the
alarm tone will sound to let you know that the
door is open.
When you close the door, the door alarm will

y

stop.

Control Lock

Control Lock

The Control Lock function disables every other

The Control Lock function disables every other
button on the display.

button on the display.

When power is initially connected to the

y

refrigerator, the Lock function is off.
If you want to activate the

y

Lock

function to lock

other buttons, press and hold the Lock button
for three seconds or more. The Lock icon will
display and the Lock function is now enabled.
To disable the

y

Lock

function, press and hold the

Lock

button for approximately three seconds.

Fresh Air Filter

Fresh Air Filter

The Fresh Air Filter helps remove odors from the
refrigerator. The Fresh Air Filter has two settings,
Auto and Power(PWR). In Auto mode, the Fresh
Air Filter will cycle on and off in increments of ten
minutes on and one hundred ten minutes off. If
set to the Power(PWR) mode, the Fresh Air Filter
will stay on continuously for four hours, cycling on
and off in increments of ten minutes on and five
minutes off. After four hours, the Fresh Air Filter
will switch back to Auto mode.

The Press the Air Filter button once for

y

Power(PWR) mode.

Press the Air Filter button again to switch

y

back to Auto mode.

[

]

( On some

models)

[

]

( On some

models)

Advertising