LG CB630 - Manual (Page 100)

6
Settings
Lock Handset
(Menu 9.6.2)
You can use a security code to avoid
unauthorized use of the phone.
If you set phone lock to When Power On,
the phone will request a security code
whenever you switch the phone on. If you
set the phone lock to When SmartChip
changed, your phone will request a
security code only when you change
your SmartChip. If you set the phone
lock to Immediately, your phone will lock
immediately.
PIN Code Request
(Menu 9.6.3)
When the PIN code request feature is set
to On, you must enter your PIN each time
you switch the phone on. Consequently,
any person who does not have your PIN
cannot use your phone without your
approval.
n
Note
Before setting the PIN code request feature to
Off, you must enter your PIN
The following options are available:
]
On: You must enter the PIN each time
the phone is switched on.
]
Off: The phone connects directly to the
network when you switch it on.
Fixed Dial Number
(Menu 9.6.4)
This allows you to restrict your outgoing
calls to selected phone numbers, if this
function is supported by your SmartChip.
The PIN2 code is required.
]
FDN On/Off
- On: You can only call phone numbers
stored in the Address Book. You must
enter your PIN2.
- Off: You can call any number.
]
FDN List: You can only call phone
numbers stored in the FDN list or phone
number started with stored numbers.