Remote control operations – LG WG1005R User Manual

Page 18

Advertising
background image

Operating Instructions

The controls look like th

is:

Controls

Remote Control Operations

REMOCON SIGNAL RECEIVER

ENERGY SAVER

T

he fan stops when the compressor stops cooling.

Approximately every 3 minutes the fan will turn on and check the room air to determine if cooling is needed.

FAN SPEED

Pressing the Fan speed button toggles between Low and High speeds.

MODE

Everytime you push this button, it will toggle

between COOL, FAN, and DRY.

ON/OFF TIMER

Each press of the button cycles through the options in this order:

1Hour 2Hours 3Hours 4Hours 5Hours 6Hours

7Hours 8Hours 9Hours 10Hours 11Hours 12Hours CANCLE
The set t emperature will be raised by 2 F after 30 minutes and again after another 30 minutes.

POWER

To turn the air conditioner ON, push the button. To turn the air conditioner OFF, push the button again.

This button takes priority over any other buttons.

When the unit is first powered up, it defaults to settings of High Cool at 72 F

TEMPERATURE SETTING

This button can automatically control the temperature of the room. The temperature can be set within a range

of 60 F to 86 F by 1 F.(16 C to 30 C by 1 C)

Select the lower number for lower temperature of the room.

Each press of the button cycles through the options in this order:

1Hour 2Hours 3Hours 4Hours 5Hours 6Hours

7Hours 8Hours 9Hours 10Hours 11Hours 12Hours CANCEL

-

Stopping Operation

-

Starting Operation

18 Room Air Conditioner

Advertising
This manual is related to the following products: