Atlas Sound FMA44-25G - Manual (Page 4)

Specifications subject to change without notice
© 2006 Atlas Sound Printed in U.S.A. 000706 ATS001458 RevC 7/06 SL10-2026
1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333 / FAX (800) 765-3435
AtlasSound.com
FMA SERIES. Equipment rack shall be Atlas Sound Model _____.
It shall be 14 gauge CRS frame with 14 gauge top and bottom sections
and include two pairs of 11 gauge CRS adjustable mounting rails plated,
drilled and tapped 10-32 with hash marks to indicate rack unit
increments. Bottom section shall be reinforced with 12 gauge stiffeners
front to back. Base to be tapped to accept factory installed leg levelers
and punched to accept optional casters. Cabinet depth shall be _____
Frame shall be finished in –962 black powder coat epoxy.
Optional:
Cabinet shall be enclosed with 16 gauge CRS swing out side panels
Model___. Side panels shall include locks keyed with technician key.
Racks shall be provided with 16 gauge CRS solid or perforated
top panel Model____,
Racks shall be provided with 550 CFM top mounting fan panel
Model____.
Door(s) shall be Model____. Doors shall include cylinder lock, handle
and shall be hinged (right, left).
Model_____. Single frame and/or entire installation shall be on casters
Model_____.
ARCHITECT AND ENGINEER SPECIFICATIONS
MODEL
GANGING
OUTSIDE DIMENSION PANEL
SPACE (D)
TOP PANEL
OPENING (E)
FLOOR
MOUNTING
HOLE
LOCATION
(F)
OPTIONAL 1"
DEEP
PLEXIGLASS
SURFACE
MOUNT
FRONT DOOR
OPTIONAL 1"
DEEP
PERFORATED
STEEL
SURFACE
MOUNT FRONT
DOOR
OPTIONAL 1"
DEEP
SOLID STEEL
SURFACE
MOUNT FRONT
DOOR
OPTIONAL 3"
DEEP
PERFORATED
STEEL
SURFACE
MOUNT FRONT
DOOR
WIDTH (A) HEIGHT (B) DEPTH
(C)
(G)
FMA44-36G 24.125
(612.65mm)
85.063"
(2160.59mm)
36"
(914mm)
77.063"
(44RU)
(1957.39mm)
31.625"
(18RU)
(803.285mm)
33.789"
(858.25mm)
PFD44 MPFD44 SFD44 MPFD44-3
19.09"
(484.89mm)
FMA44-25G 24.125
(612.65mm)
85.063"
(2160.59mm)
25.5"
(648mm)
77.063"
(44RU)
(1957.39mm)
21.0625"
(12RU)
(535mm)
23.289"
(591.55mm)
PFD44 MPFD44 SDF44 MPFD44-3
19.09"
(484.89mm)
FMA35-25G 24.125
(612.65mm)
69.313"
(1760.54mm)
25.5"
(648mm)
61.313"
(35RU)
(1557.34mm)
21.0625"
(12RU)
(535mm)
23.289"
(591.55mm)
PFD35 MPFD35 SDF35 MPFD35-3
19.09"
(484.89mm)
MODEL
GANGING
OPTIONAL
CASTER
KIT
OPTIONAL
VENTED SIDE
PANELS
FMA44-36G NONE FMA44-36LRPV
FMA44-25G FMARTK25 FMA44-25LRPV
FMA35-25G FMA35-25LRPV