LG LW2413HR - Manual (Page 16)

Remote control
The remote control and control panel will look like one of the following pictures.
Operating Instructions
16 Room Air Conditioner
Operating Instructions
Power
Temp
Fan Speed
Timer Mode
Energy
Saver
Auto
Swing
REMOTE CONTROLLER
7
8
7
Operation starts when this button is pressed and stops when you
press the button again.
POWER
OPERATION MODE SELECTOR
the desired fan speed.
Everytime you push this button, it will toggle between Cool, Fan, and Heat.
Cool - Compressor runs and cools the room. Use the and FAN buttons to
set the desired temperature and circulation fan speed.
Fan - Fan circulates air but compressor does not run. Use the FAN button to set
Heat - Heater runs and heats the room.
- when the air conditioner is off, it can be set to automatically turn
Delay OFF - when the air conditioner is on, it can be set to automatically turn
on from 1 to 24 hours at its previous mode and fan settings.
off from 1 to 24 hours.
Delay ON
ON/OFF TIMER
FAN SPEED SELECTOR
Use to set the fan speed to Low (F1), High (F2).
TEMPERATURE CONTROL
The thermostat monitors room temperature to maintain the desired temperature.
The thermostat can be set between 60 F~86 F (16 C~30 C).