4english – LG 65UB9300 User Manual

Page 4

Advertising
background image

4

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

Grounding

(Except for devices which are not grounded.)

Ensure that you connect the earth ground

wire to prevent possible electric shock

(i.e. a TV with a three-prong grounded AC

plug must be connected to a three-prong

grounded AC outlet). If grounding methods

are not possible, have a qualified electrician

install a separate circuit breaker. Do not try to

ground the unit by connecting it to telephone

wires, lightning rods, or gas pipes.

Short-circuit

Breaker

Power

Supply

As long as this unit is connected to the AC

wall outlet, it is not disconnected from the AC

power source even if the unit is turned off.

Do not attempt to modify this product in

any way without written authorization from

LG Electronics. Unauthorized modification

could void the user’s authority to operate this

product.

Outdoor Antenna Grounding

(Can differ by country):

If an outdoor antenna is installed, follow

the precautions below. An outdoor antenna

system should not be located in the vicinity

of overhead power lines or other electric light

or power circuits, or where it can come in

contact with such power lines or circuits as

death or serious injury can occur. Be sure the

antenna system is grounded so as to provide

some protection against voltage surges

and built-up static charges. Section 810 of

the National Electrical Code (NEC) in the

U.S.A. provides information with respect to

proper grounding of the mast and supporting

structure, grounding of the lead-in wire to

an antenna discharge unit, size of grounding

conductors, location of antenna discharge

unit, connection to grounding electrodes and

requirements for the grounding electrode.

Antenna grounding according to the National

Electrical Code, ANSI/NFPA 70

Ground Clamp

Grounding Conductor

(NEC Section 810-21)

Antenna Lead in Wire

Electric Service

Equipment

Antenna Discharge Unit

(NEC Section 810-20)

Ground Clamp

Power Service Grounding

Electrode System

(NEC Art 250, Part H)

NEC: National Electrical Code

Cleaning

When cleaning, unplug the power cord and

wipe gently with a soft cloth to prevent

scratching. Do not spray water or other

liquids directly on the TV as electric shock

may occur. Do not clean with chemicals such

as alcohol, thinners, or benzine.

Moving

Make sure the product is turned off,

unplugged, and all cables have been

removed. It may take 2 or more people to

carry larger TVs. Do not press or put stress

on the front panel of the TV.

Ventilation

Install your TV where there is proper

ventilation. Do not install in a confined space

such as a bookcase. Do not cover the product

with cloth or other materials while plugged.

Do not install in excessively dusty places.

If you smell smoke or other odors coming

from the TV, unplug the power cord and

contact an authorized service center.

Keep the product away from direct sunlight.

Never touch this apparatus or antenna during

a lightning storm.

When mounting a TV on the wall, make sure

not to install the TV by hanging the power

and signal cables on the back of the TV.

Do not allow an impact shock, any objects to

fall into the product, and do not drop anything

onto the screen.

DISCONNECTING THE DEVICE FROM THE

MAIN POWER

The Power Plug is the disconnecting device.

In case of an emergency, the Power Plug

must remain readily accessible.

Batteries

Store the accessories (battery, etc.) in a safe

location out of the reach of children.

This apparatus uses batteries. In your

community there might be regulations that

require you to dispose of these batteries

properly due to environmental considerations.

Please contact your local authorities for

disposal or recycling information.

Do not dispose of batteries in a fire.

Do not short circuit, disassemble, or allow

the batteries to overheat.

Advertising