LG BP730 - Manual (Page 18)

Connecting 18
C
onnecting
2
1. Select [Connection Setting] option in the
[Settings] menu then press Wheel ( ).
2. Read the preparations for the network settings
and then press Wheel ( ) while [Start] is
highlighted.
Network will automatically be connected to the
unit.
Advanced Setting
If you want to set the network settings manually,
use w/s to select [Advanced Setting] on the
[Network Setting] menu and press Wheel ( ).
1. Use w/s to select [Wired] and press Wheel
( ).
2. Use w/s/a/d to select the IP mode
between [Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP
address automatically.
y If there is no DHCP server on the network
and you want to set the IP address manually,
select [Manual Input] then set [IP Address],
[Subnet Mask], [Gateway] and [DNS Server].
,
Note
3. Select [Next] and press Wheel ( ) to apply
network settings.
Network connection status is displayed on the
screen.
4. Press Wheel ( ) while [OK] is highlighted to
finish the wired network settings.