LG 47SL90 - Manual (Page 81)

PICTURE
CONTR
OL
81
■ Convert the color of a different video to HD color.
■ As the tool used by the experts to make adjustments by using the test patterns, this
does not affect other colors but can be used to selectively adjust the 6 color areas
(Red/Green/Blue/Cyan/Mgt/Yellow).
Color difference may not be distinctive even when you make the adjustments for the
general video.
Adjusts Red/Green/Blue/Yellow/Cyan, Magenta.
- Red/Green/Blue/Yellow/Cyan, Magenta Color: The adjustment range is -30 - +30.
- Red/Green/Blue/Yellow/Cyan, Magenta Tint: The adjustment range is -30 - +30.
- This feature is disable in RGB-PC and HDMI-PC mode.
White Balance
(Expert control)
: 42/47/55LH90
Color Temperature
(Expert control)
: 42/47SL80,
42/47SL90
Color Management System
Color Standard
Standard: Displays standard set of colors.
Wide: Increase number of colors used.
■ Maximize the utilization of color to increase color quality.
Color Gamut
■ Show clearer and distinctive yet natural edges in the video.
■ This function is enabled in " P Piiccttu urree m mo od dee - E Exxp peerrtt".
Edge Enhancer
■ This is the pattern necessary for expert adjustment.
■ This function is enabled in "P Piiccttu urree M Mo od dee - E Exxp peerrtt" when you watch DTV.
Expert Pattern
■ This is the function to filter the specific colors of the video.
You can use the RGB filter to set color saturation and hue accurately.
Color Filter
*This feature is not available for all models.
■ This is the function to express richer color.
■
This feature represents rich color as much as conventional video signal.
■ This function is enabled in "P Piiccttu urree m mo od dee - E Exxp peerrtt" when xvYCC signal is
inputted through HDMI.
xvYCC
■ This is the function to adjust the overall color of the screen to the feeling you want.
a. Method : 2 Points
- Pattern: Inner, Outer
- Red/Green/Blue Contrast, Red/Green/Blue Brightness:
The adjustment range is -50 - +50.
b. Method : 10 Point IRE
- Pattern: Inner, Outer
- IRE (Institute of Radio Engineers) is the unit to display the size of the video signal
and can be set among 10, 20, 30 - 100. You can adjust Red, Green or Blue accord-
ing to each setting.
- Luminance: This function displays calculated luminance value for 2.2 gamma. You can
input luminance value you want at 100 IRE, than the target luminance value for 2.2
gamma is displayed at every 10 steps from 10 IRE to 90 IRE.
- Red/Green/Blue: The adjustment range is -50 - +50.
*This feature is not available for all models.
■ As the technology to reduce the power consumption while keeping the same bright-
ness, this has the effect of reducing power consumption, improvement in contrast. OPC