LG LSC22991ST - Manual (Page 18)

Operation
18
ENGLISH
Starting
When your refrigerator is first installed, allow it to stabilize at normal operating
temperatures for 2-3 hours prior to filling it with fresh or frozen foods.
If operation is interrupted, wait 5 minutes before restarting.
Adjusting the temperatures and functions
Function display board
Door-in-Door
1 LOCK STATUS
This indicator shows the current status for
the control panel functions is set to LOCK.
2 ICE PLUS
When the ICE PLUS button is pressed, the
display will indicate the selected function
has been activated.
3 DISPENSER SELECTION INDICATOR
Shows Cubed ice or Crushed Ice selection
that will be dispensed when the push switch
is pressed.
4 ICE ON/OFF INDICATOR
Shows Icemaker's "ON" or "off" selection
that will be operated when "Ice on" is
lighted.
5 FREEZER TEMPERATURE
Indicates the set temperature of the freezer
compartment in Celsius or Fahrenheit.
6 REFRIGERATOR TEMPERATURE
Indicates the set temperature of the
refrigerator compartment in Celsius or
Fahrenheit.
7 FRESH AIR FILTER INDICATOR
This indicator shows the current status for
the FRESH AIR FILTER. See “How to
remove the old filter.”
8 DISPENSER LIGHT INDICATOR
When the LIGHT button is pressed, the
display will indicate the selected function:
The dispenser light is on, this indicator will
appear on the display panel.
9 WATER FILTER STATUS
This indicator shows the current status for
the water filter. See Resetting the Filter
Indicator.
SmartPull™Handle
Easily opens the door.
Pulling too strongly
can cause damage. Do
not remove the rubber.