LG E2341VG-BN - Manual (Page 11)

10
Control Panel Functions
AUTO Button AUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press the
AUTO button on the MONITOR SETUP OSD. (Only
Analog Mode)
This will automatically adjust your display image to the
ideal settings for the current screen resolution size
(display mode).
The best display mode is
E2241V/E2341V/E2341VG/E2441V: 1920 x 1080
INPUT Button
Use this button to turn the display on or off.
The power indicator stays blue if the display is running
properly (On Mode). If the display is in Sleep Mode , the
power indicator is blinking blue.
Power Button &
Power Indicator
(SOURCE Hot key)
Exit the OSD(On Screen Display). EXIT Button
SUPER ENERGY
SAVING Button Use this button to enter SUPER ENERGY SAVING
menu.For more information, refer to page 15.
(Only for HDMI input)
(For D-SUB and
DVI input)
VOLUME Button To adjust the volume of headphone/speaker.
When two input signals at least are connected, you can
select the input signal (D-SUB/DVI/HDMI) you want. When
only one signal is connected, it is automatically detected.
The default setting is D-Sub.
Use this button to select source from input.