LG DLGX8001V - Manual (Page 11)

11
ENGLISH
INTRODUCINg YOUR DRYER
Time and status display
Time and status display shows the settings, estimated time remaining, options, and status
messages for your dryer. When the dryer is turned on, the light in the display will illuminate.
Button Description
ESTIMATED TIME REMAINING y
- When the START/PAUSE button is pressed, the dryer will display the estimated (SENSOR DRY) or set time
(TIME DRY) remaining, and begin tumbling.
NOTE : The cycle time on SENSOR DRY cycles may fluctuate as the dryer recalculates drying time for optimal
results.
CYCLE COMPLETION INDICATOR WITH CHECk FILTER REMINDER y
- This portion of the display shows which stage of the drying cycle is currently underway (CHECK FILTER,
DRYING, COOLING, or WRINKLE CARE).
CHILD LOCk INDICATOR y
- When CHILD LOCK is set, the CHILD LOCK indicator will appear and all buttons are disabled except the
POWER button. This prevents children from changing settings while the dryer is operating.
CHECk FILTER LIGHT y
- When the dryer is turned on, this light flashes as a reminder that the lint filter must be cleaned for each
load. The light goes out when the cycle is started.
CUSTOM PROGRAM y
- Custom Program allows you to store a customized dry cycle for future use. It allows you to save favorite
temperature, dry level, and other options for a cycle, and then recall them at the touch of a button.
FLOW SENSE LIGHT y
- This light does not indicate a problem with your dryer, but rather a restriction in your home exhaust system
This issue can be easily fixed without calling for service. Please check for the following conditions if the Flow
Sense light is lit or you are experiencing longer than usual dry times:
- Make sure that the exhaust connecting to the dryer is not kinked.
- Make sure that the dryer duct is clean and free of buildup : one way to check if the exhaust is clogged, is
to start the dryer on a normal cycle, go outside where the dryer is vented and check the airflow. If there is
no airflow or if the airflow is weak, then you may have a restriction (lint buildup) that needs to be removed.
Using the dryer while the “Flow Sense” light is on may create an unsafe environment.