LG WM2050CW - Manual (Page 18)

18
H O W TO U S E
POwER ON/OFF BUTTON
Press to turn the washer ON. Press again to turn
the washer OFF.
NOTE: Pressing the ON/OFF button during a
cycle will cancel that cycle and any load settings
will be lost.
CYCLE SELECTOR kNOB
Turn this knob to select the desired cycle. Once
the desired cycle has been selected, the standard
presets will be shown in the display. These
settings can be adjusted using the cycle settings
buttons anytime before starting the cycle.
START/PAUSE BUTTON
Press this button to START the selected cycle.
If the washer is running, use this button to PAUSE
the cycle without losing the current settings.
NOTE: If you do not press the START/PAUSE
button within 4 minutes of selecting a cycle, the
washer automatically turns off.
CUSTOM PROgRAM BUTTON
Press the CUSTOM PROGRAM button to save
and recall a customized wash cycle for future use.
You can save the Cycle, Wash/Rinse Temperature,
Spin Speed, and Soil Level settings, as well as
other cycle options.
1
2
CYCLE SETTINgS BUTTONS
Use these buttons to adjust the desired cycle
options for the selected cycle.
DELAY wASH BUTTON
Press this button to delay the start of the
wash cycle. Each press of the button
increases the delay time by one hour, up to
19 hours.
TIME AND STATUS
The display shows the settings, estimated
time remaining, options, and status
messages for your washer.
OPTION BUTTONS
The option buttons allow you to select ad-
ditional cycle options and will light when
selected. Certain buttons also allow you to
activate special functions by pressing and
holding the button for 3 seconds.
For detailed information about the individual
options, please see the following pages.
5
6
3
7
8
4
CONTROL PANEL FEATURES
wM2050C*
2 1 3
6
5
7 4
8