LG LHB535 - Manual (Page 96)

96 Troubleshooting
T
roubleshoo
ting
6
Controlling a TV with
the supplied remote
control
You can control your TV using the buttons
below.
TV Control
Buttons
Button Operation
1 (TV Power) Turn the TV on or off .
AV/ INPUT Switch the TV’s input source
between the TV and other
input sources.
VOL +/- Adjust the volume of the
TV.
PR/CH U/u Scan up or down through
memorized channels.
NOTE
Depending on the unit being connected, you may
not be able to control your TV using some of the
buttons.
Setting up the remote to
control your TV
You can operate your TV with the supplied
remote control.
If your TV is listed in the table below, set the
appropriate manufacturer code.
1. While holding down 1 (TV POWER) button,
and press the manufacturer code for your
TV with the numerical buttons (see the
table below).
Manufacturer Code Number
LG 1(Default), 2
Zenith 1, 3, 4
GoldStar 1, 2
Samsung 6, 7
Sony 8, 9
Hitachi 4
2. Release the 1 (TV POWER) button to
complete setting.
Depending on your TV, some or all buttons
may not function on the TV, even after
entering the correct manufacturer code. When
you replace the batteries of the remote, the
code number you have set may be reset to
the default setting. Set the appropriate code
number again.
7
Appendix
HB905SB-AD.BUSALL_ENG_6866.indd 96 HB905SB-AD.BUSALL_ENG_6866.indd 96 10. 10. 20 9:20 10. 10. 20 9:20