2 asus ez flash 2 utility, Asus ez flash 2 utility -2 – Asus P5KPL-AM SE User Manual

Page 26

Advertising
background image

2-2

ASUS P5KPL-AM SE

2.1.2

ASUS EZ Flash 2 utility

ASUS EZ Flash 2 allows you to update the BIOS without having to use a bootable floppy disk

and a DOS-based utility.

Download the latest BIOS file for this motherboard from the ASUS website at

www.asus.com.

To update the BIOS using EZ Flash 2.
1.

Insert the USB flash disk that contains the BIOS file to a USB port, then launch EZ

Flash 2 in either of these two ways:
(1) Press <Alt> + <F2> during POST to display the following:

(2) Enter BIOS setup program. Go to the Tools menu to select EZ Flash 2 and press

<Enter> to enable it.

Press <Tab> to switch between drives until the correct BIOS file is found.

2.

Select the correct BIOS file then press <Enter>, EZ Flash 2 updates the BIOS and

automatically reboots the system when done.

• This function supports USB flash disks with FAT 32/16 format and single partition only.
DO NOT shut down or reset the system while updating the BIOS to prevent system boot

failure!

ASUSTek EZ Flash 2 BIOS ROM Utility V3.25

Current ROM

Update ROM

A:

Note

FLASH TYPE:

MXIC 25L8005

PATH:

A:\

BOARD:

P5KPL-AM SE

VER:

0309 (H:00 B:01)

DATE:

09/28/2008

BOARD:

Unknown

VER:

Unknown

DATE:

Unknown

[Enter] Select or Load [Tab] Switch [V] Drive Info

[Up/Down/Home/End] Move [B] Backup [ESC] Exit

Advertising