Audiovox AV-428 - Manual (Page 14)

128-6634
14 of 16
CD CH CD CH CD CH CD CH CD CHA A A A ANGER ERR NGER ERR NGER ERR NGER ERR NGER ERROR CODES OR CODES OR CODES OR CODES OR CODES
If a problem should develop while operating the CD changer, the error code “Err” may appear on the display
panel. This can indicate a number of problems with the unit, including a mechanical error or an error in the
microprocessor control of the changer. If the error code should appear, try ejecting and re-loading the magazine
into the changer. While the magazine is out of the changer, make sure the discs are clean, undamaged, and
loaded correctly (see Owner’s Manual of the CD changer). You may also try activating the RESET button
ct
on the unit, but this will also erase the time and pre-set memories.
If the suggested measures do not solve the problem, contact an approved warranty station near you for further
assistance.
14 14 14 14 14
CD CHCD CHCD CHCD CHCD CH
AAAAA
NGER ERRNGER ERRNGER ERRNGER ERRNGER ERR
OR CODESOR CODESOR CODESOR CODESOR CODES