Updating the tv firmware wi-fi direct setting – LG 24MT35S User Manual
Page 8
ENG
ENGLISH
6
SMART
REC
→ Settings → SUPPORT → Software Update
Uses Software Update to check and obtain the latest version. If not updated, certain functions may not work
properly. It is also possible to check manually for available updates.
Software Update
Set it to
On.
If an update is available, a prompt will appear to perform the update.
Automatic update mode If an update is available, the update automatically starts without prompting.
Check Update Version
Checks the latest update version installed. When a new update is available, the
download process can be performed manually.
NOTE
y
When the update starts, a pop-up window is displayed to show the update status and then disappears within
five seconds.
y
The latest version can be obtained via the digital broadcast signal or an internet connection.
y
Changing the programme while downloading the software via a digital broadcast signal interrupts the
download process. Returning to the initial programme allows downloading to resume.
y
If software is not updated, certain functions may not work properly.
y
[For Finland/Sweden/Denmark/Norway models.]
If the software update is performed via the broadcasting signal, you will be prompted to continue the update
regardless of whether the
Automatic update mode is enabled or not.
SMART
REC
→ Settings → NETWORK → Wi-Fi Direct
The
Wi-Fi Direct function supports wireless connection technology. With SmartShare
TM
, you can share files or
screens of devices connected to
Wi-Fi Direct.
[TAAAA]
Do you want to request a connection?
Automatically connect without asking
Yes
No
Connection
Wi-Fi Direct
Device Name
Connection
TAAAA
BBBB
Wi-Fi Direct
a
On
1 If
Wi-Fi Direct is set to On, a list of available devices
appears.
»
To use
Wi-Fi Direct, go to Settings → NETWORK and
set
Wi-Fi Direct(
a
) to
On.
2 When you are prompted to request connection, select
Yes.
Wi-Fi Direct is now connected to your TV.
* If you are not using
Wi-Fi Direct to minimize the interference between Wi-Fi devices, it is recommended to set
Wi-Fi Direct(
a
) to
Off. You can only use devices that support Wi-Fi Direct.
Updating the TV Firmware
Wi-Fi Direct Setting