LG CV09 - Manual (Page 9)

PRODUCT INTRODUCTION
9
ENGLISH
1 PLASMA Button (OPTIONAL)
Used to start or stop the plasma-purifica-
tion function.
2 JET COOL Button
Speed cooling operates super high fan
speed.
3 OPERATION MODE SELECTION Button
Used to select the operation mode.
4 FUNCTION SETTING Button
Used to set or clear Auto Clean, Smart
Clean, Electric heater or Individual vane
angle control
5 LCD LUMINOSITY Button (OPTIONAL)
Used to adjust LCD luminosity
6 SMART CLEAN Button (OPTIONAL)
Used to start or stop Smart Clean.
7 CLEAR ALL Button
Used to clear all timer.
8 ROOM TEMPERATURE SETTING Button
Used to select the room temperature.
9 ON/OFF Button
Used to turn on/off the unit.
10 INDOOR FAN SPEED SELECTION Button
Used to select fan speed in four steps
low, medium, high and chaos.
11 UP/DOWN AIRFLOW Button
Used to stop or start louver movement
and set the desired up/down airflow di-
rection.
12 LEFT/RIGHT AIRFLOW Button (OP-
TIONAL)
Used to set the desired left/right(horizon-
tal) airflow direction.
13 TIMER AND TIME SETTING Button
Used to set the time of starting or stop-
ping and sleeping operation.
14 ROOM TEMPERATURE CHECKING But-
ton
Used to check the room temperature.
15 °C/°F SWITCH Button
Used to switch temperature reading from
Celsius to Fahrenheit.
16 RESET Button
Used to reset the remote controller.
1
8
9
10
11
12
13
14
15
16
2
3
4
5
6
7
Cooling Mode
Auto Mode or Auto Changeover
Dehumidification mode
Heating Mode
Fan Mode
• Cooling Model( ), Heat Pump Model( )
Operation Mode
Wireless Remote Controller
This air-conditioner is equipped with wireless remote controller basically. But if you want to be
available with wired remote controller, you pay for it.