LG LZ-H100GXN0 - Manual (Page 13)

Operating Instructions (Accessory)
Interlinked operation control
Press button on the remote
controller.
- It is used only when air conditioner and the
ventilation product are interlinked.
1
Pressing button in ventilation
mode starts ventilation. 2
Pressing button in ventilation
mode will change the ventilation mode.
- Every time the button is pressed,
it changes from 'Heat exchange
→ Normal → Automatic'.
❈ The display on the remote controller
displays only when it is in ventilation mode,
and when it converts to air conditioner
mode, it displays the desired temperature.
3
Pressing button in ventilation
mode changes the strength of wind.
- Pressing the button can select from
'Low
→ High → Super High'.
4
Changing back to air conditioner mode
1) Automatic Conversion : when no button is
pressed for 15 seconds or longer, it
automatically converts back to air
conditioner mode.
2) Manual Conversion : Pressing button
in ventilation mode will manually convert.
5
Interlinked Operation with Direct
Expansion Ventilation
Press 'Ventilation' button on the wired remote
controller and enter Ventilation control mode to check
the operation of ventilation product.
❈
To convert back to air conditioner mode, press
‘Ventilation' button at the ventilation mode.
- If no button pressed for 15 seconds or more at
ventilation mode, it automatically converts back to air
conditioner mode.
- Ventilation product represent general ventilation
product and direct expansion ventilation product.
❈
<Air conditioner mode> <Ventilation mode>
It can only be used when the air conditioner is interlinked with direct expansion ventilation product.
Owner's Manual 13
ENGLISH