Atlas Sound BPI195-320 - Manual (Page 2)

Specifications subject to change without notice
1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A. / TELEPHONE: (800) 876-3333 / FAX (800) 765-3435
Specifications subject to change without notice
© 2001 Atlas Sound LP Printed in U.S.A. 000501 SL10-1520
ARCHITECT AND ENGINEER SPECIFICATIONS
Blower shall be Atlas Sound model BP195-320 or approved equal to
deliver 320 CFM@ 0-INCHES. Unit shall have two 7" dia. fans, with
stainless steel precision ball bearings. Enclosure shall be 17" wide
with a 19" wide grille. Grille shall provide maximum air flow, and have
knurled captive fasteners. Enclosure to have notched flanges on EIA
spacings. Filter shall be washable, permanent type, constructed of
corrugated aluminum mesh mounted in an aluminum channel. Cord
shall be 44 inches long three wire with molded plug and shall be inter-
nally grounded to unit housing. Enclosure shall be finished in textured
black epoxy with chrome grille.
P/N IS FLT195-320