Troubleshooting, Self-diagnosis function, Before requesting service – LG MS07AQ User Manual

Page 20

Advertising
background image

20

TROUBLESHOOTING

ENGLISH

TROUBLESHOOTING

Self-diagnosis function

This product has a built-in self-diagnosis function. If an error occurs, the lamp of the indoor unit
will blink in 2 second intervals. If this occurs, contact your local dealer or service center.

Before requesting service

Please check the following before you contact the service center. If the problem persists, contact
your local service center.

Problem

Possible causes

Corrective action

Abnormal operating condi-
tions.

• There is a burning

smell and a strange
sound coming from
the unit.

• Turn off the air conditioner, unplug the

power cord and contact the service cen-
ter.

• Water leaks from

the indoor unit even
when the humidity
level is low.

• The power cord is

damaged or gener-
ating excessive
heat.

• A switch, a circuit

breaker (safety,
ground) or a fuse is
not operated properly.

The air conditioner does not
work.

• The air conditioner

is unplugged.

• Check whether the power cord is

plugged into the outlet.

• A fuse is blown or

the power supply is
blocked.

• Replace the fuse or check if the circuit

breaker has tripped.

• A power failure has

occurred.

• Turn off the air conditioner when a power

failure occurs.

• When the power is restored, wait 3 min-

utes, and then turn on the air conditioner.

• The voltage is too

high or too low.

• Check if the circuit breaker has tripped.

• The air conditioner

turned off automati-
cally at a preset
time.

• Press the power button again.

• Battery setting is

wrong in the remote
controller.

• Is the battery inserted in Remoted con-

troler? Is the battery inserted with the
correct terminal (+)(-)?

• Even if you check the upper lists, the air-

conditioner does not operate. Please re-
place new batteries.

Advertising