LG CC07AWV - Manual (Page 13)

Owner's Manual 13
o During Auto Clean Operation, moistures left in indoor units after cooling operation or healthy dehumidifica-
tion operation can be removed.
Select Auto Clean Operation by the function setting button( ) .
Now whenever the unit is turned off, the indoor fan is still running
for about 30 minutes internally without cooling or dehumidification
operation. This function dries up any remains of moisture & cleans
the unit internally. If you push the Auto Clean button again, this
function is cancelled.
o During Auto Clean fuction, only ON/OFF button, Plasma button, Auto Clean but-
ton is used. During this operation, 'Co' lamp lights up.
NOTE
Auto Clean Operation
Operating Instructions
PLASMA Purification Operation
Plasma filter is a technology developed by LG to get rid of microscopic contami-
nants in the intake air by generating a plasma of high charge electrons. This
plasma kills and destroys the contaminants completely to provide clean and hy-
gienic air.
Plasma purification operation can be started by pressing the PLASMA BUTTON on the
remote controller.
Repressing it will deactivate the operation.
• This features can be used in any operation mode and fan speed by pressing the plasma button.
• Separate plasma purification operation is possible in stop condition. It is cancelled by pressing plasma
button or on/off button.
NOTE
PLASMA
This operation circulates the air without cooling or heating. It can be
activated by pressing the OPERATION MODE SELECTION BUT-
TON. Once the air circulation is activated you can select the fan
speed by pressing the INDOOR FAN SPEED SELECTION BUTTON.
MODE
Air Circulation Operation
ENGLISH