Abocom IAM800 - Manual

The IAM800 is an internal PCI ADSL Modem card. It enables
high-speed data access across regular phone lines and transmits
voice simultaneously with DMT technology. The IAM800 is
perfectly designed for desktop computers for broadband ADSL
services. Its PCI interface allows subscribers to do DIY
installation at home even at office.
To promise the cost-effective ADSL last mile solution and
compliance with PPP standard for instant installation,
IAM800 can be operated in WIN98/NT/Win2K/WIN XP and
will absolutely help you enjoy the coming broadband life.
The
PCI ADSL Modem
IAM800
INTRODUCTION
FEATURES
* Two-chip PCI chipset solution (plus line driver)
* Direct interface to 3 V/5 V PCI
* PCI V2.2 compliant (with power management)
Support for PPP over ATM, native ATM and
RFC1483 encapsulations
Complete modem package
No dependency on external processor
Easy to use command interface
Full reference design kit for manufacture
Low power, High performance
SPECIFICATIONS
ADSL m odem sp ecifications:
Up to 8 Mbps downstream
Up to 832 Kbps upstream
ADSL st andard co mpliant:
ANSI T1.413 Issue 2
ITU G.992.1 (G.DMT) Annex A
ITU G.992.1 (G.DMT) Annex B
ITU G.992.2 (G.lite)
U-R2
PCI In terface:
PCI 2.2 compliance, plug and play
System R equirements
Intel Pentium processor-based PC or higher
Microsoft Windows 98SE /ME / 2000 /
XP / NT4.0, Linux6.2
A CD- ROM drive
Windows
Support for multiple ADSL standards:
Integrated PCI interface
Programmable architecture facilitates quick and easy
modem software upgrades
Exceeds all G.lite reach requirements
G.lite support for distributed filter/splitterless operation
Host software targeted for Win98/NT4/Win2K*
implementation with installation software, miniport
drivers, and control panel software
Alcatel chipsets solution