Abit AMD ATHLON KV8 PRO - Manual (Page 49)

BIOS Setup 3-21
3-6. Power Management Setup
ACPI Suspend Type:
This item selects the type of Suspend mode.
[S1(PowerOn-Suspend)]: Enables the Power On Suspend function.
[S3(Suspend-To-RAM)]: Enables the Suspend to RAM function.
Run VGABIOS if S3 Resume:
Three options are available: Auto Yes No. The default setting is Auto. This item can let you choose
when S3 resume active, the VGA BIOS need to be initiative or not.
Resume by OnChip USB:
Two options are available: Disabled or Enabled. The default setting is Disabled. When set to Enabled,
any event affecting from onchip USB will awaken a system that has powered down. This item can be
configured only if the item “ACPI Suspend Type” is set to [S3(STR)].
Power Button Function:
This item selects the method of powering off your system:
[Delay 4 Sec.]: Pushing the power button for more than 4 seconds will power off the system. This will
prevent the system from powering off in case you accidentally hit or pushed the power button.
[Instant-Off]: Pressing and then releasing the power button at once will immediately power off the
system.
CPU THRM-Throttling:
This item controls the CPU speed by cutting down its regular power to a percentage during the STR
(Suspend To RAM) state.
Restore On AC Power Loss:
This item selects the system action after an AC power failure.
User’s Manual