Aiwa 570CDCMP3 - Manual (Page 49)

CD PLAY
11 ENGLISH
Intro play
Press INT during CD play.
The “SCAN” indication lights up, and the first 10
seconds of all the tracks on the CD are played in
order.
When the desired track is found, press INT again.
The unit returns to normal CD play.
Repeat play
Press REP1 during CD play.
The “REPEAT 1” indication lights up, and the
currently selected track is played repeatedly.
Press REP1 again to cancel Repeat play.
Note
If Repeat play is not activated, all the tracks on
the CD are played repeatedly.
Random play
Press RANDOM during CD play.
The “RANDOM” indication lights up, and the
tracks on the CD are played in random order.
Press RANDOM again to cancel Random play.
Note
During Random play, even if r is pressed
repeatedly, it won’t take you back to previous
tracks, only to the beginning of the current track.
MP3 PLAY
You can play MP3 files* written on CD-ROMs,
CD-Rs, or CD-RWs by following the procedure
below.
* In the following, “track” and “album” mean “MP3
file” and “folder” in PC terminology, respectively.
1 Press OPEN to open the front panel,
then insert a CD-ROM, CD-R, or CD-RW
with the labeled side upward.
The unit starts scanning the disc.
2 Close the front panel.
During scanning of the disc, “NOW READING”
scrolls across the display.
After scanning, the total number of albums
and tracks appear on the display, then the
unit automatically starts playing the disc from
the first track of the first album.
Each time the track is changed, this display
appears and remains for 5 seconds.
The total number
of Albums The total number
of Tracks
Album number Track number
continued
CD-ROM indicator