Asus P5GL-MX User Manual

Page 28

Advertising
background image

1 - 1 6

1 - 1 6

1 - 1 6

1 - 1 6

1 - 1 6

C h a p t e r 1 : P r o d u c t i n t r o d u c t i o n

C h a p t e r 1 : P r o d u c t i n t r o d u c t i o n

C h a p t e r 1 : P r o d u c t i n t r o d u c t i o n

C h a p t e r 1 : P r o d u c t i n t r o d u c t i o n

C h a p t e r 1 : P r o d u c t i n t r o d u c t i o n

1.7

System memory

1.7.1

1.7.1

1.7.1

1.7.1

1.7.1

Overview

Overview

Overview

Overview

Overview

The motherboard comes with four 184-pin Double Data Rate (DDR) Dual
Inline Memory Modules (DIMM) sockets.

The following figure illustrates the location of the sockets:

1.7.2

1.7.2

1.7.2

1.7.2

1.7.2

Memory Configurations

Memory Configurations

Memory Configurations

Memory Configurations

Memory Configurations

You may install 256 MB, 512 MB and 1 GB unbuffered non-ECC DDR DIMMs
into the DIMM sockets using the memory configurations in this section.

Installing DDR DIMMs other than the recommended configurations
may cause memory sizing error or system boot -ure. Use any of the
recommended configurations in Table 1.

Always install DIMMs with the same CAS latency. For optimum
compatibility, it is recommended that you obtain memory modules
from the same vendor. See Table 2 for qualified DDR DIMMs.

Due to chipset limitation, DIMM modules with 128 Mb memory chips
or double-sided x16 memory chips are not supported in this
motherboard.

P5GL-MX

®

P5GL-MX 184-pin DDR DIMM sockets

DIMM_A1

DIMM_A2

DIMM_B1

DIMM_B2

Advertising