LG GR-B429BTCA - Manual (Page 21)

Operation
50
1.
After turning the HANDLE Tank backward with the
WATER TANK installed at the DOOR, Open the COVER
BUCKET and then fill water using a kettle etc.
* Fill water while watching a sight glass on the front of
the WATER TANK.
* Water up to 3l can be filled.
2.
Press and fix the COVER BUCKET.
3.
After filling spring water, fix the HANDLE TANK at a
proper position.
1.
Insert the valve assembly into the cover of a PET
bottle. (Height of PET ; Below 310MM)
2.
Assemble the PET bottle on
the door.
3.
Make a hole for air-inflow
on the top of the PET bottle.
1.
Press the Dispenser Pad with a cup.
2.
If pressing the Pad, water inside of the Dispenser is
supplied.
3.
If slowly removing a cup from the Pad, water will not
fall down.
Filling of
WATER TANK
Filling of
PET Bottle
Drinking
Do not use other beverage (milk, juice, carbonated
beverage etc) than spring water. Especially beverage
including grain must not be used (may result in failure). w w Caution
When integrating the valve assembly, please proceed it
after checking if the rubber packing inside is correctly
assembled or not. w w Caution
O X X