Avaya 1020 User Manual
Page 59
Avaya 1010/1020 User Guide
59
5
Upgrade script failed
After the image has been successfully uploaded the system runs
an upgrade script for final processing. This error indicates a
failure in that script. This typically occurs when using an upgrade
image for another Avaya product.
6
Unable to run upgrade script
The system was unable to run the upgrade script. This typically
occurs when using an upgrade image for another Avaya product.
7
Unable to mount upgrade
partition
After the image has been copied to the system, the system failed
to mount the image. This typically occurs if the upgrade image is
corrupt or when using an upgrade image for another Avaya
product.
8
No permission
The system failed to read the upgrade partition.
9
Corrupt image
The upgrade image is corrupt and unusable. This typically occurs
due to a bad image or errors during upload to the device.
10
Bad argument
An invalid argument was submitted to the upgrade process. This
typically occurs when using an upgrade image for another Avaya
product.
11
Invalid signature
The encryption signature is invalid. This typically occurs if the
image is corrupt or compromised.
12
Decrypt failed
The system was unable to decrypt the upgrade image. This
typically occurs if the image is corrupt or compromised.
13
Developer system
The system is configured for development and can only be
upgraded by an Avaya representative.
14
Upgrade in progress
An upgrade is already in progress. The system only supports one
upgrade at a time.
Code
Problem
Description