Airlink101 AGIGAUSB - Manual (Page 4)

4
Introduction
The USB 2.0 Gigabit Network Adapter (hereafter referred to as the Gigabit Adapter) is
specifically designed to plug into any available Universal Serial Bus port of a desktop or
laptop PC. The Gigabit Adapter is for users who wish to connect to a 10Mbps, 100Mbps
or 1000Mbps Fast Ethernet LAN using the convenience and ease of USB technology.
The Gigabit Adapter complies with USB Specification 1.0/1.1/2.0. It uses an USB type B
connector to connect directly to the USB host computer and a RJ-45 connector provides
a quick and simple method of connecting to an Ethernet or Fast Ethernet network.
This low power-consuming device draws power from the host USB bus directly, so no
external power supply is required. Simply connect the USB port of this device to the
computer and plug a standard twisted-pair Ethernet cable into the RJ-45 port, and you’ll
be networked in no time. This device offers a simple way to connect to your network.
Package Contents
• Gigabit Network Adapter
• USB 2.0 Cable
• Driver
CD
• Quick Installation Guide
Specifications
Network Specification
• IEEE802.3 10BaseT, 802.3u 100BaseTX and 802.3ab 1000Base-T.
• Cat3/Cat5 UTP cable up to 328ft/100M.
Host Interface
• High-power Bus-powered from USB HOST or HUB, no external power needed.
• Full Speed/High Speed USB device, upstream B USB port.
Supported operating systems
• Windows
2000/XP
LED Indicators
• Link: When the device is well-connected to the computer, the Link LED will
appear as solid green.
• TX/RX: 10/100/Gigabit linking status
10Mbps: Appears as solid orange + green when the device is connected to 10Mbps
network; blinking orange + green when transmitting data.