Alamo SL72 - Manual (Page 88)

OPERATION
SL72 03/08 Operation Section 4-6
© 2008 Alamo Group Inc.
OPERA
T
ION
3.3 Skid Steer Warning Equipment
If transporting or operating the skid steer and mower near a public roadway, the skid steer must be equipped
with proper warning lighting and a Slow Moving Vehicle (SMV) emblem which are clearly visible from the rear
of the unit.
Maintain all manufacturer equipped safety shields and guards. Always replace shields and guards that were
removed for access to connect, service, or repair the mower and skid steer.
3.5 Auxiliary Hydraulics
The skid steer must be equipped with Front
Auxiliary Hydraulics. The hydraulic output
capacity of the skid steer must match the
equipped mower drive motor. Reference the skid
steer operator’s manual to determine the hydraulic
output specifications of the skid steer.
A decal is affixed to the mower designating the
mower as equipped with either a High, Medium, or
Low Flow Motor. If the decal is missing or is not
legible, the motor flow volume can be determined
from its part number (found on tag attached to the
motor) using the table below or by contacting
Servis-Rhino customer service.
The mower is not shipped equipped with hydraulic
hose coupler ends. Coupler ends must be
purchased from an authorized skid steer dealer to
ensure mower and skid steer auxiliary hydraulic
couplers are compatible.
3.4 Hitch
The skid steer must be equipped with a compatible
Standard Universal Quick Mount Hitch to connect
and operate the mower. OPS-SS-0001