Output level, Phantom power, Output level led meter – Audio-Technica AT-MX351 User Manual

Page 9

Advertising
background image

The preamplifier gain may be reduced further, allowing the SmartMixer to accept line-level
sources. Changing the settings of the internal switches designated by “SW3,” “SW9,” “SW15”
and “SW21” will cause an input reduction of 50 dB for channels 1, 2, 3 and 4 respectively.
Note that the appropriate internal switches can be used in combination for a total sensitivity
reduction of up to 60 dB for each channel.

Output Level

The SmartMixer’s output is factory set at line level. Should mic-level output be desired,
simply unplug the unit, remove the top cover and locate the switch on the circuit board
marked “SW26” (Figs. 4 and 5, page 11). Changing the setting of this switch will cause a
50 dB reduction in output.

Phantom Power

Each of the SmartMixer’s inputs supplies +48V DC phantom power. Should it be required
to disable the phantom power, simply unplug the unit, remove the top cover and locate the
switches designated on the circuit board by “SW1,” “SW7,” “SW13” and “SW19” (Figs. 4 and 5,
page 11). Changing the settings of these switches will disable phantom power on channels 1,
2, 3 and 4, respectively. Note that, although they do not require phantom power for operation,
most balanced-output dynamic microphones can be used without disabling the SmartMixer’s
phantom power.

Output Level LED Meter

The Output Level LED meter is factory set to indicate RMS output. Should peak output
indication be desired, simply unplug the unit, remove the top cover and change the setting of
the switch designated on the circuit board by “SW27” (Figs. 4 and 5, page 11). “Zero” (0) level
is factory-calibrated at +4 dBm into 600 ohms.

10

Summary of Internal Controls

Function

Ch 1

Ch 2

Ch 3

Ch 4

Output

48V Phantom Power

SW1

SW7

SW13

SW19

10 dB Input Atten.

SW2

SW8

SW14

SW20

50 dB Mic /Line Atten.

SW3

SW9

SW15

SW21

SW26

Limiters (on/off)

SW4

SW10

SW16

SW22

“Off ” Atten. Range

SW5

SW11

SW17

SW23

Preamp Output Gating

SW6

SW12

SW18

SW24

Limiter Thresholds

VR2

VR5

VR8

VR11

“Off ” Atten. Adjustment

VR3

VR6

VR9

VR12

NOMA

--

--

--

--

SW25

Meter RMS/Peak

--

--

--

--

SW27

Figure 3. Summary of internal controls

Advertising