Altec Lansing Octiv AIR A11964 R07 - Manual (Page 6)

6
Transmitter Base
Front Panel
1 STANDBY / ON
Switches the power mode between Standby and On for
the transmitter base. This light (left of the STANDBY key)
illuminates when the transmitter base is on.
2 SYNC 1 LED
Illuminates to indicate that the transmitter base is
synchronized with one wireless speaker unit.
3 SYNC 2 LED
Illuminates when two or more M812 wireless speaker
units are connected and synchronized with the
transmitter base. Any speaker that is synchronized can
control the system.
Rear Panel
1 AUX
Connect auxiliary devices (e.g., portable CD players) to
3.5 mm stereo, line-level input jack using supplied cable.
2 FM
Connect the supplied 75 Ohm FM “T” antenna.
3 9VDC
Connect the supplied 9V DC/1.6A wall adapter. Connect
only the adapter supplied with the M812.
1
2
3
1
2
3