AMX MAX-AVP - Manual (Page 55)

MAX-AVP User Interface
49 MAX-AVP Audio-Video Player
Setup Page – Tuning tab
Use the options in the Tuning tab (FIG. 35) to set the volume level for stereo analog outputs (Volume),
and fine-tune video output (Brightness, Contrast Saturation).
Select one of the four tabs, and use the Up/Down arrow buttons to adjust the selected setting.
Select the double arrow to make quick adjustments by pressing SELECT.
Select the single arrow to make fine adjustments by pressing SELECT.
Setup Page – Locale tab
Use the options in the Locale tab (FIG. 36) to select preferred content audio and subtitle languages, and
to set the region code for the AVP’s DVD drive.
To change these settings, select the Up or Down arrow for setting that you want to change, and press
SELECT to scroll through the possible choices.
English (EN) is the default setting.
Refer to the DVD Language Codes section on page 51 for a full listing of supported languages
and their associated language codes.
Highlight and select Save as Default to save the current language preferences as the default
settings.
Use the options in the Region Control section of this page to change the DVD Region Code setting for
the DVD drive in the MAX-AVP (FIG. 37):
FIG. 35 Setup Page - Tuning tab
FIG. 36 Setup Page - Locale tab