Asus Dual TualatinTM Motherboard TRL-DLS - Manual (Page 53)

ASUS TRL-DLS User’s Manual 53
4. BIOS SETUP
4. BIOS SETUP
PCI Configuration
Onboard SCSI BIOS [Auto]
[Auto] allows the motherboard BIOS to detect whether you have a Adaptec SCSI
controller. If the SCSI controller is detected, the SCSI BIOS will be enabled. If no
SCSI controller is detected, the onboard SCSI BIOS will be disabled.
Setting to [Disabled] deactivates the onboard SCSI BIOS so that the BIOS on an
add-on SCSI card can be used. If your SCSI card does not have a BIOS, the SCSI
card will not function. Configuration options: [Auto] [Disabled]
ONB SCSI BIOS First [No]
This field allows giving priority to the onboard SCSI BIOS for SCSI functions over
other SCSI controllers. Configuration options: [No] [Yes]
Primary VGA BIOS First [PCI VGA Card]
This field allows you to select the primary graphics card. Configuration options:
[PCI VGA Card] [Onboard VGA]
USB Function [Enabled]
Set this field to [Enabled] if you want to use Universal Serial Bus devices.
Configuration options: [Disabled] [Enabled]
Onboard LAN Boot ROM [Disabled]
Onboard 2nd LAN Boot ROM [Disabled]
When set to [Enabled], these fields allow the system to boot from the network using
the onboard LAN controller boot ROM. Configuration options: [Disabled] [Enabled]