AGA ELECTRIC RANGE EE LM-4 - Manual (Page 12)

12
BLACK SILVER
too high too low
correct amount of
stored heat
RED
BLACK LINE
The heat indicator is above the roasting oven door and has three sections: black, silver and red. When the indicator is on
or about the black line in the silver section, the range is at the correct working temperature. The purpose of the heat
indicator is to show whether the range contains the full amount of stored heat. Therefore the heat indicator should only be
referred to first thing in the morning or after a period of several hours during which no cooking has been done.
NOTE: IT DOES NOT INDICATE THE OVEN TEMPERATURE.
THE HEAT INDICATOR
To turn the range off, switch off the electricity supply at the breaker panel.
When the range is in use, the control knob should be in the HIGH section (i.e. 4/5) of the numbered band (See Fig. 3),
with the indicator on or about the black line in the silver section of the heat indicator (see above). It may be necessary to
adjust the control knob slightly to achieve this.
Once the correct setting has been confirmed, the control will operate automatically to maintain the range at the correct
temperature and need not be adjusted.
THERMOSTAT CONTROL
DESN 513468 Fig. 3