Avaya SMON C360 - Manual (Page 51)

Avaya C360 Manager User Guide 37
Device Configuration
LAG STP Mode Enables LAG Spanning Tree. The Spanning
Tree mode creates a logical tree topology out
of any arrangement of bridges, resulting in a
single path between any two end stations. The
Spanning Tree Mode also provides high fault
tolerance. The possible states are:
• Enable - Enables the Spanning Tree
Mode.
• Disable - Disables the Spanning Tree
Mode.
For more information refer to Spanning Tree
Algorithm (STA) in The Reference Guide.
LAG STP State The state of the LAG in terms of the Spanning
Tree Protocol. The possible states are:
• Disable - The LAG is disabled.
• Blocking - STP is enabled and currently
blocking the LAG. The LAG is effectively
disabled to prevent the formation of a
loop in the network.
• Forwarding - The LAG is currently
forwarding information received.
STP Admin Edge The administrative state of the edge LAG
parameter. Possible states include:
• TRUE - This LAG is assumed to be an
edge LAG.
• FALSE - This LAG is assumed not to be
an edge-LAG.
STP Oper Edge The operational state of the edge LAG
parameter.
• TRUE - This LAG is operating in the
state specified in STP Admin Edge.
• FALSE - A BPDU was received by the
LAG.
Table 3-6. LAG Configuration Fields - Advanced Tab (Continued)
Field Description